差分探頭| TMDP0200

更新時間：2024-09-07

產品型號：TMDP0200

產品報價：

產品特點：差分探頭| TMDP0200 The THDP0100 supports bandwidths up to 100 MHz and slew rates up to 2500 V/ns at 1/1000 gain. These probes are supplied with two sizes of hook tips and have an overrange visual and a

TMDP0200差分探頭| TMDP0200的詳細資料：

差分探頭| TMDP0200

Features & Benefits

Bandwidths up to 200 MHz
Up to 6000 V Differential （DC + pk AC）
Up to 2300 V Common （RMS）
Overrange Indicator
Safety Certified
Switchable Attenuation
Switchable Bandwidth Limit

Applications

Floating Measurements
Switching Power Supply Design
Motor Drive Design
Electronic Ballast Design
CRT Display Design
Power Converter Design and Service
Power Device Evaluation

Safe High-voltage Probe Solutions

Tektronix offers a broad portfolio of high-voltage probing solutions that enable users to safely and accuray make floating measurements.

The THDP0100 and P5210A have the largest differential dynamic range capability from Tektronix, allowing users to safely measure up to ±6000 V. The THDP0100 supports bandwidths up to 100 MHz and slew rates up to 2500 V/ns at 1/1000 gain. These probes are supplied with two sizes of hook tips and have an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe.

The THDP0200 and P5205A are active differential probes that are capable of safely measuring differential voltages up to ±1500 V. The probes are effective in making measurements in IGBT circuits such as motor drives and power converters. The THDP0200 supports bandwidths up to 200 MHz and slew rates up to 275 V/ns at 1/250 gain.

The TMDP0200 and P5202A are designed for medium-voltage applications with differential requirements up to ±750 V. These probes have lower attenuation ranges and offer better signal-to-noise ratio.

The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.

WARNING: For safe operation, do not use the P5200A High-voltage Differential Probe with oscilloscopes that have floating inputs （isolated inputs）, such as the Tektronix TPS2000 and THS3000 Series oscilloscopes. The P5200A High-voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.

　如果你對TMDP0200差分探頭| TMDP0200感興趣，想了解更詳細的產品信息，填寫下表直接與廠家聯系：